Form A: System Configuration
PAGE
2 of 2
Lucent Technologies
Bell Labs lnnovations
Required for PARTNER Advanced Communications System.
For additional instructions, see pages 3 and 4.
8.
9.
System Settings. Write response on line for each item.
●
Receptionist answers calls during business hours? Write “Yes” or “No”
.
●
Number of Lines {#104}—By default, 3 lines per PARTNER ACS processor module, 2 lines
per 206 module and 4 lines per 400 module are assigned to each extension. Write
number if different from default
.
●
Transfer Return Rings {#105}—By default, a transferred call rings 4 times before going
to the transfer return extension. Write number (0-9, 0 = no return) if different from
default .
●
Outside Conference Denial {#109}—By default, a conference call can include 2 outside
parties. Write “No” if 2 outside parties are not allowed
.
●
VMS Cover Rings {#117}—By default, a call rings 3 times before going to the user’s
mailbox. Write number (1-9) if different from default
.
●
Ring on Transfer {#119}—By default, the caller hears ringing when the call is transferred.
Write “NA” if Music on Hold or silence is desired .
●
Toll Call Prefix {#402}—By default, 0 or 1 must be dialed before the area code for a
long distance call. Write “No” if 0 or 1 is not required
.
●
System Password {#403}—By default, no password is programmed to override
dialing restrictions and to turn Night Service on and off. Write 4 digits if password is
desired .
●
Star Code Dial Delay {#410}—By default, the system inserts a 0 second delay after a valid
Central Office star code when it autodials. Write number (1–5) of seconds if a longer delay
is desired or “NO” if this feature should not be active
.
●
Music on Hold {#602}—By default, the Music on Hold jack on the processor module is
active. Write “No” if the jack is deactivated
.
Line Coverage.
If VMS-AA is checked on Form A, Item 7, specify the following:
●
VMS Hunt Delay {#506}—By default, VMS answers calls after 2 rings. Write “Del” if calls
ring 4 times before VMS answers
.
●
VMS Hunt Schedule {#507}— By default, VMS is on all the time. Check if Day only or
Night only is desired:
❑
Day only
❑ Night only
Auxiliary Equipment (System). Check if applicable:
❑
❑
❑
❑
❑
❑
❑
❑
Battery Backup
Caller ID Devices
Loudspeaker Paging: Number of zones
Magic on Hold (Music on Hold {#602} must be active.)
Uninterruptible Power Supply
SMDR. If checked, specify the following if appropriate:
●
SMDR Record Type {#608}—By default, all calls are included on call reports. Write “Out”
if only outgoing calls are reported
.
●
SMDR Output Format {#610}—By default, up to 15 digits are printed for dialed
numbers in the Number field of the call report. Write “24” if a maximum of 24 digits is
desired
.
PARTNER Contact Closure Adjunct. If checked, write in the number (1-4) below to specify
Operation Type for each Contact Closure as appropriate:
OperationType
{#613}
1 = 1 second on
2 = 3 seconds on ( ✔ )
3 = 5 seconds on
4 = Toggle
Contact
Contact
Closure 1
Closure 1
Backup/Restore PC Card. If checked, write “Active” if Automatic System Programming
Backup {#123} is desired .
Notes: Write any additional information that you want to communicate to the installer.
10.
11.
12.
Installation Date
13.
Order Nos.
14.
Sales Support Representative’s Name
Telephone No.
Comments to this Manuals