Lucent Technologies Marine Radio 518-456-151 User Manual download pdf (Page 16)

Group Hunting—Ring Hunt-g i77 g

Rings the first available extension in the designated Hunt Group, or transfers a call

to an extension in the group. If unanswered after 3 rings, the call moves to the next

available extension, and so on, until the call is answered or until the caller hangs up.

g = 1–6

Group Hunting—Voice Signal HuntVS-

g i*77 g

Voice signals the first available extension in the designated Hunt Group, or transfers

a call to the extension with a voice-signaled announcement. The caller is connected

only if that extension answers

. g = 1–6

Group Pickup P/U Grp-

g i66 g

Picks up an intercom, transferred, or outside call ringing at any extension in the

designated Pickup Group.

g = 1–4

Last Number Redial LNR

f05

Automatically redials the last outside number dialed up to a maximum of 28 digits.

This feature can be used

only

to redial the

last

outside number dialed.

Loudspeaker Paging Loudspk

i70

Connects the user to the loudspeaker paging system, if one is connected to the

system.

Message Light Off MsgOff-

xx f10 xx

Turns off the message light on the phone at the designated extension. You can also

program an extension number on the button.

Message Light On MsgOn-

xx f09 xx

Turns on the message light on the phone at the designated extension. You can also

program an extension number on the button.

Privacy

Priv f07

Prevents other people with the same line from joining calls being conducted at this

extension. When the feature is active, the button light is on. This feature overrides

Automatic Extension Privacy {#304}.

Recall Recall

f03

“Recalls” a dial tone to access a PBX/Centrex feature while on a call on a PBX/

Centrex line (pressing Recall disconnects an intercom call).

Save Number Redial SNR

f04

This feature can be programmed onto more than one button.

Using this feature

while on an outside call saves the number dialed into temporary memory. The

number stays in memory until a different one is saved; this feature can be used

again to redial the number at any time. (Unlike Last Number Redial, the user must

use this feature to save the number as well as to redial it; Save Number Redial lets

the user make other outside calls before redialing the saved number.) Account

codes cannot be saved and redialed using this feature.

Simultaneous Paging SPage

i*70

Accesses the loudspeaker paging system and all idle system phones with speakers

assigned to Calling Group 1.

Station Lock

Lock f21

Lets the user lock the extension by entering a code of four digits (0-9) on the

telephone dialpad.

Touch-Tone Enable TT-EN

f08

Lets user with rotary lines access phone services that require touch-tone digits. For

example, after calling a bank-by-phone service and being prompted to enter touch-

tone digits, using this feature changes the digits dialed to touch tones for the rest of

the call.

VMS Cover

VMSCover f15

Turns voice mail coverage for the extension on and off if PARTNER MAIL,

PARTNER MAIL VS, or PARTNER Voice Messaging is installed. When the feature

is active, the button light is on. This feature overrides Automatic VMS Cover.

Voice Interrupt on Busy Talk-Back

VIOB f18

Lets user respond to voice interrupt on busy call while still active on the existing call.

Voice Mail Messages VMMsgs-777

i777

Places an intercom call to the PARTNER MAIL, PARTNER MAIL VS, or PARTNER

Voice Messaging (if available), so the user can check messages, send messages,

or administer greetings.

Voice Mailbox Transfer VMBox

f14

Transfers a caller directly to a specific extension’s voice mailbox, so that the caller

can leave a message without having to first ring the extension.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 40 41

Comments to this Manuals

No comments

Lucent Technologies Marine Radio 518-456-151 User Manual Page 16

Comments to this Manuals

Related products and manuals for Telephones Lucent Technologies Marine Radio 518-456-151