Lucent Technologies Marine Radio 518-456-151 User Manual

PARTNER® AdvancedCommunications SystemSystem Planner518-456-151Issue 1November 1997

8Identify Restrictions/PermissionsSpecify restrictions and permissions for each extension.Line Access Restriction {#302} orPool Access Restriction {#3

9Form C Supplemental Instructions:Button TemplatesThere are eight pages to Form C—one page for each type of system phone andone page for an Intercom A

Intercom AutodialerThe buttons on the Intercom Autodialer are automatically programmed asIntercom Auto Dial buttons for all system extensions in the f

Example TemplatesThese examples show a PARTNER-34D telephone, PARTNER-CA48 IntercomAutodialer programmed for a receptionist, and a PARTNER-18 telephon

12Wake Up Service Button Wake {#115}Allows the user at extension 10 to schedule an intercom call to a target extension at adesignated time. If Music o

Caller ID Name Display ID-Name F16When a user at a display phone is on a call on a line that has Caller ID informationavailable, this feature lets the

Group Hunting—Ring Hunt-g i77 gRings the first available extension in the designated Hunt Group, or transfers a callto an extension in the group. If u

Form D Supplemental Instructions:Number ListsUse this form to specify lists of Disallowed, Allowed, and Emergency telephonenumbers. Also use this form

Emergency Phone Number List {#406}You can create a list of emergency numbers that can be dialed at any time byany extension that has access to an outs

Telephone NumberWrite the number exactly as it should be dialed. Numbers can be up to 28digits, including the digits 0–9, *, #, and the special dialin

Copyright © 1997 Lucent Technologies 518-456-151All Rights Reserved Issue 1Printed in U.S.A. November 1997NoticeEvery effort was made to ensure that t

Required for PARTNER Advanced Communications System.For additional instructions, see page 2.PAGE4. Person to be Trained Phone(XXX) XXX – XXX2. Install

Form A: System ConfigurationRequired for PARTNER Advanced Communications System.For additional instructions, see page 3.PAGE2 of 39. System Settings.

Form A: System ConfigurationPAGE3 of 313. Installation Date 14. Order Nos.15. Sales Support Representative’s NameTelephone No.11. Auxiliary Equipment

PAGERequired for PARTNER Advanced Communications System.For additional instructions, see page 5.Form B1: System ExtensionsIMPORTANT: A system displa

PAGERequired for PARTNER Advanced Communications System.For additional instructions, see page 5.Form B1: System Extensions2 of 41. If checked, see Fo

PAGEMay be used if Ext. Name Display is checked on Form B1,page 1 of 4 or page 2 of 4.Form B1: System Extensions3 of 4Note: Only 12 characters displ

PAGEMay be used if Ext. Name Display is checked on Form B1,page 2 of 4.Form B1: System Extensions4 of 4Notes: Only 12 characters display on MLS-mode

PAGE1 of 2Required if you want to change extension settings from defaults. For additional instructions, see pages 6 and 7.Form B2: Customized Extensi

Form B2: Customized Extension SettingsPAGE2 of 2Required if you want to change extension settings from defaults. For additional instructions, see pag

04DELINPAGE1 of 8␣␣␣␣␣␣␣␣␣Form C1: PARTNER-34D PhoneMake as many copies as you need. Use template and/or checklist. For additional instructions, see

1IntroductionSetup decisions for the PARTNER® Advanced Communications System (ACS)should be recorded on the forms in this Planner. The forms must be f

PAGEExtensions programmed as shown (circle choices): 10 11Form C2: Intercom Autodialer2 of 8MSVS–30S. JonesSAMPLEMake as many copies as you need.

Intercom IntercomExt.PAGEForm C3: PARTNER-18 Phone3 of 804DELINSAMPLESpecify Automatic Line Selection: _______________________________________________

Intercom IntercomExt.PAGEForm C4: PARTNER-6 Phone4 of 8Check Desired FeaturesAlso write in extension or group numberPAGEForm C4: PARTNER-6 Phone4 of

Intercom IntercomExt.04DELINPAGE5 of 8␣␣␣␣␣␣␣␣␣Form C5: MLS-34D PhoneSAMPLETemplate Instructions• If desired, write in line number, pool access code†

* In Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool. (ACS R2.0 or later only)PAGE6 of 8Check Desired Fea

PAGE7 of 8Check Desired FeaturesAlso write in extension or group number04DELINSAMPLETemplate Instructions• If desired, write in line number, pool acce

* In Hybrid mode only, if pool 880 is assigned, these two buttons are associated with this pool. (ACS R2.0 or later only)Intercom IntercomExt.PAGEMa

List 101020304050607080910Allowed Phone Number Lists {#407}Required only if Allowed List Assignment {#408} is specified on Form B2.EntryTelephone Numb

Required if Form B1 identifies External Hotlines. For additionalinstructions, see page 15.NOTE: An External Hotline phone is a standard phone that dia

Write DescriptionWrite Description01020304050607080910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758

2VMS-AAAutomated Attendant service of PARTNER MAIL™ orPARTNER MAIL VS™, which must be purchased separately.If the receptionist does not answer an inco

PAGE1 of 1Form E: System Speed Dial NumbersOptional for PARTNER Advanced Communications System. For additional instructions, see page 16.1You can dia

518-456-151Issue 1November 1997

39. System SettingsReceptionist answers calls during business hours?If “Yes,” be sure to record settings on these forms that will allowthe receptionis

411. Auxiliary Equipment (System)Check boxes that apply for auxiliary equipment connected to the control unit orto system wiring. All appropriate hard

5NOTE: In addition to the VMS extensions, you must specify an extension (withno lines assigned) where a remote maintenance device is installed. Writ

Write Transfer Return Ext. No. {#306}By default, a transferred call returns to the originating extension if the call is notpicked up. To specify a dif

7Form B2 Supplemental Instructions:Customized Extension SettingsEach row on Form B2 specifies settings—including group assignments—thatcan be copied t