Lucent Technologies Computer Hardware partner voice messaging card User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 47
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
2.
3.
Press [
3 ] to record the general mailbox greeting.
Do one of the following:
To approve the greeting, press [
1
].
To re-record the greeting, press [
2
].
To exit without changing the greeting, press [
*
] [
7
].
Unlike some voice mail systems, PARTNER Voice Messaging allows you to
record the general mailbox greeting from a remote location. For example, if
you want to record instructions for inclement weather.
Changing the System Manager's Password
This section tells you how to change the System Manager's password (for
mailbox 0) that is required for changing PARTNER Voice Messaging settings.
The factory setting for mailbox 0 is 1234. To prevent unauthorized
programming of the system, you should change the default password
immediately after installation or any time the password has been reset. You
must assign four digits for a password. It is recommended that you create a
password from random, nonsequential digits.
You cannot reinitialize the System Manager's password. If you change the
password and forget it, you can contact the National Customer Care Center at
1 800 628-2888 or call your Lucent Technologies Representative or local
Authorized Dealer for instructions for how to reset the password.
To change the password for mailbox 0:
1.
If necessary, access the Programming Main Menu. If you are already at
the Programming Main Menu, skip to Step 2.
A)
Call PARTNER Voice Messaging:
If calling internally, press [
Intercom
] [
7
] [
7
] [
7
] or the programmed
VMMsgs button (see programming instructions on page 33).
If calling from outside the system, press [
*
] [
R
] ([
*
] [
7
]) during the
general mailbox greeting.
B)
Enter [
0 ] followed by the password for mailbox 0.
Press [
5
] to change the password.
2.
The prompt asks you to enter your new password.
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Comments to this Manuals

No comments