Lucent Technologies Computer Hardware partner voice messaging card User Manual download pdf (Page 32)

At the Data: prompt, enter the number of the extension specified in the

VMS-Mail column.

To program another line, press [

Next Item

] or [

Prev Item

] until the appropriate line

number displays,

Repeat Steps 3 and 4 for each VMS-Mail line for which an extension num-

ber is written on Form A.

Continue with the next section, "Automatic VMS Cover."

Automatic VMS Cover (#310)

Check Form B2 to see if Automatic VMS Cover is assigned to any extensions.

If it is, follow the procedure below. If not, skip to "VMS Cover Rings."

To change the Automatic VMS Cover setting for an extension to Assigned as

indicated on Form B2:

Press [

] [

] .

Enter the number of the first extension to which Automatic VMS Cover is

to be assigned.

Press [

Next Data

] until the display reads

1 Assigned.

To program another extension, press [

Next Item

] or [

Prev Item

] until the extension

number shows on the display.

Repeat Steps 3 and 4 for each extension to which Automatic VMS Cover

is to be assigned.

Continue with "VMS Cover Rings" below.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 46 47

No comments

Lucent Technologies Computer Hardware partner voice messaging card User Manual Page 32