Lucent Technologies Computer Hardware partner voice messaging card User Manual download pdf (Page 15)

Check that the green light on the front of each module is lit:

If a single light is out, power down the system, reseat the module,

then power up the system.

If multiple lights are out, power down the system, reseat the leftmost

module that has a light out, then power up the system.

If the lights are still out, in the continental U. S., call the Lucent

Technologies hotline at 1 800 628-2888 for support. Outside the

continental U.S., contact your Lucent Technologies Representative

or local Authorized Dealer.

If you have a 2-Slot carrier or a standalone

configuration, you are finished with this

procedure. If you have a 5-Slot carrier,

continue with Step 6A.

Make sure all modules are seated

properly. The cover will not fit if the

modules are not seated properly.

B) To replace the cover, grasp it by its

upper edges and hold it squarely over

the control unit.

Place the cover over the modules and

make sure it fits firmly in place.

Tighten the screw on the lower front cover.

Leave the PARTNER Voice Messaging PC Card in the processor module. The

card stores message, greetings, etc.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 46 47

No comments

Lucent Technologies Computer Hardware partner voice messaging card User Manual Page 15